BikeCAD Pro How To Forum

I've used the free BikeCAD many times in past years but not for the last year or so. Now I find it no longer works although I've followed all the advice given in this forum. My suggestion is to fix it and charge a nominal fee for a given period. John Robert

Hi Brent,

Is it possible to put with the belt the distance from tooth to tooth ?

Gates Carbon Drive = 11mm
Conti Drive System =14mm
Advanced Belt Drive = 14mm

I'm trying to get a set of BMX type dropouts crafted onto my current project. Are they available at your website? in a copy them from the BMX Part of this program?

Hello,

is there a way to view or print the non drive side view?

The design that I am currently working on has an 8 inch head tube length. It would make it a lot easier for me if I could shorten it to about 5.4 inches. I don't see a measurement in your frame set up that allows you to change the head tube length. Did I miss something?

I know I've asked this question before, and I'm sure you told me how to fix it but I've forgotten.

Hey Folks,

It looks like the NDS drop-out is not in the right place when I turn on the Aux View for CS/SS. And when i turn on the tire two appear. The CS are symmetric. Not sure what else I should be looking at.

Thoughts/suggestions?

Having trouble with downloading one of the designs that you have in your library.The problem is that my current version 11.4 doesn't seem to recognize the file that I downloaded. Do I need to update to the current version?

I got a bit of a problem. I had a good design of a 24 x 1.75 pair of wheels on a current little knock around I had designed. Then my computer got sick. Unfortunately I lost that design and I am subsequently forgotten how to change the tire/wheel size from my standard 700 C down to that little science wheel.

any clues?

Hi all,

I am probably missing something, but I would like to increase dimension F in the seat stays window to achieve a nicer bend profile to the stays.

However, the label appears greyed out and I can't see any means of defining this dimension.

Thanks in advance, and apologies if this has been dicussed somewhere previously.

Hey Folks,

I ran into an interesting issue when mocking up a balance bike.

1. BB is set to 0/0

2. DT offset is 20mm

3. I'm trying to match the DT/ST offset at the CS.

In the CS pallet I try to adjust the value for E. I can adjust the number but nothing previews + I cannot do anything else (e.g. zoom in/out, change variables in other paletts, etc). However, if I change the CS to a wishbone then I can adjust the number + everything works as normal.